HCPL-M452

Small Outline, 5 Lead, High Speed Optocouplers

Currently Viewing:

The Avago HCPL-M452 is a power module interface optocoupler. This small outline high CMR, high speed, diode-transistor optocoupler is a single channel device in a five lead miniature footprint. Its SO-5 JEDEC registered (MO-155) package outline does not require "through holes" in a PCB.

This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes.

The Avago HCPL-M452 uses an insulating layer between the light emitting diode and an integrated photon detector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times over that of a conventional photo-transistor coupler by reducing the base-collector capacitance.

It is designed for high speed TTL/TTL applications. A standard 16 mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6 k ohm pull-up resistor. CTR is 19% minimum at IF = 16 mA.

 

Features

  • Surface Mountable
  • Very Small, Low Profile JEDEC Registered Package Outline
  • Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes
  • High Speed: 1 Mb/s
  • TTL Compatible
  • Guaranteed AC and DC Performance over Temperature: 0 degrees C to 70 degrees C
  • Open Collector Output
  • Recognized Under the Component Program of U.L. (File No. E55361) for Dielectric Withstand Proof Test Voltage of 3750 Vac, 1 Minute
  • Lead Free Option "-000E"

Applications

  • Line Receivers - High common mode transient immunity (>1000 V/ms) and low input-output capacitance (0.6 pF)
  • High Speed Logic Ground Isolation - TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL
  • Replace Slow Phototransistor Optocouplers
  • Replace Pulse Transformers - Save board space and weight
  • Analog Signal Ground Isolation - Integrated photon detector provides improved linearity over phototransistor type

Lifecycle Status

Active

Replacement Part

Certifications

  • RoHS
    Pb & Pb-free options available

Lifecycle Status

Active

Substance Compliance

  • RoHS
    Pb & Pb-free options available
Specification Value
Lifecycle Active
Distrib. Inventory Yes
Samples Available Yes
Product Type 1 MBd Transistor Optocoupler
Max Qty of Samples 20
RoHS6 Compliant Pb & Pb-free options available
Package SO5
IF Min. (mA) 16.0
CTR Min. (%) 15.0
Prop Delay (tPLH) Max. (µs) 1.0
Prop Delay (tPHL) Max. (µs) 1.0
CMR (min.) (V/µs) 1000.0
Vcm (V) 10.0
UL Insulation Rating Viso (VRMS) 3750
IEC Maximum Working Insulation Voltage Viorm (VPEAK) 567.0

Documentation

Application Brief (1) i
Application Note (5) i
Brochures (2) i
Data Sheet (1) i
Design Guide (1) i
FAQs (1) i
Obsolescence Notice (1) i
Options Data Sheet (5) i
Product Change Notice (PCN) (15) i
Promotional Material (1) i
Regulatory Certificate (1) i
Reliability Data Sheet (2) i
Selection Guide (2) i
White Papers (3) i