HCPL-6430

Hermetically Sealed, Very High Speed, Logic Gate Optocouplers

Currently Viewing:

The HCPL-6430 is a commercial grade two channel hermetically sealed optocoupler in a 20 Pad Leadless Ceramic Chip Carrier with solder dipped pads. The solder contains lead.
The product is capable of operation and storage over the full military temperature range and may also be purchased with full MIL-PRF-38534 Class Level H or K testing or from the DSCC SMD 5962-89571. The HCPL-6430 is manufactured and tested on a MIL-PRF-38534 certified line and Class H and K versions are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits.
Each channel contains an AlGaAs light emitting diode which is optically coupled to an integrated high gain photon detector. This combination results in very high data rate capability. The detector has a threshold with hysteresis which typically provide 0.25 mA of differential mode noise immunity and minimizes the potential for output signal chatter. The detector in the single channel units has a three state output stage which eliminates the need for a pull-up resistor and allows for direct drive of a data bus.
All units are compatible with TTL, STTL, LSTTL, and HCMOS logic families. The 35 ns pulse width distortion specification guarantees a 10 MBd signaling rate at 125 degrees C with 35% pulse width distortion. Package styles for this die set in one or two channels are 8-Pin DIP through hole and 20 pad leadless ceramic chip carrier. Most devices may be purchased with a variety of lead forms and plating options. See the datasheet for details.
Because the same electrical die (emitters and detectors) are used for each channel of each device listed in the datasheet, absolute maximum ratings, recommended operating conditions, electrical specifications, and performance characteristics shown in the datasheet figures are virtually identical for all parts. Occasional exceptions exist due to package variations and limitations and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities give justification for the use of data obtained from one part to represent other parts performance for reliability and certain limited radiation test results.

Features

  • Commercial Grade, Two Channel, 20 Pad LCCC
  • Performance Guaranteed from -55 degrees to 125 degrees C
  • High Radiation Immunity
  • Reliability Data
  • MIL-PRF-38534 Class H and Class K Available
  • DSCC Standard Microcircuit Drawing Available (Class H and K)
  • Three Hermetically Sealed Package Configurations Available
  • One and Two Channel Devices Available (may be different package)
  • High Speed: 40 M bit/s
  • Active (Totem Pole) Outputs
  • CMR: 500 V/micro-second Guaranteed
  • 1500 Vdc Withstand Test Voltage
  • Three Stage Output Available
  • Compatible with TTL, STTL,LSTTL, and HCMOS Logic Families

Applications

  • Military and Aerospace
  • High Reliability Systems
  • Transportation, Medical, and Life Critical Systems
  • Isolation of High Speed Logic Systems
  • Switching Power Supplies
  • Isolated Bus Driver (Networking Applications)
  • Ground Loop Elimination
  • Computer-Peripheral Interfaces
  • Pulse Transformer Replacement
  • High Speed Disk Drive I/O
  • Digital Isolation for A/D, D/A Conversion
  • Harsh Industrial Environments

Lifecycle Status

Active

Lifecycle Status

Active

Specification Value
Lifecycle Active
Distrib. Inventory Yes
Samples Available Yes
CMR (min.) (V/µs) 3000.0
Data Rate 40 Mb/s
Hysteresis (mA) 0.25
Hysteresis Uom mA
IF Min. (mA) 6.0
Input Current Ma Uom mA
RoHS6 Compliant N
Max Qty of Samples 2
Package 20 Terminal Hermetic LCCC
Product Type Hermetic High Speed Logic Gate
Prop Delay (tPHL) Max. (µs) 60.0
Prop Delay tPHL Uom ns
Prop Delay (tPLH) Max. (µs) 60.0
Prop Delay tPLH Uom ns
PWD (max.) 35
Pwd Max Uom ns
Reliability Class Commercial
VDD2 (V) 4.75

Documentation

Application Note (2) i
Data Sheet (1) i
Design Guide (1) i
Product Change Notice (PCN) (3) i
Technical Specification (1) i
White Papers (1) i