Subminiature High Performance AlInGaP LED Lamps
The HLMT-QL00 dome lamps use an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern.
All of these devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead, or Z-bend. Right angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing are available for through hole mounting. For more information refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps data sheet.
These subminiature solid state lamps utilize the newly developed aluminum indium gallium phosphide (AlInGaP) LED technologies the transparent substrate carrier technology (TS = HLMT-Devices). The TS HLMT-Devices are especially effective in very bright ambient lighting conditions.
- Subminiature Dome Package
Nondiffused Dome for High Brightness
- Wide Range of Drive Currents
- Color: 590 nm Amber
- Ideal for Space Limited Applications
- Axial Leads
- Available with Lead Configurations for Surface Mount and Through Hole PC Board Mounting
|Color Bin Selection||Open|
|Dimension Lxwxh In Mm||2.2 x 2.1 x 2.9|
|Intensity Bin Selection||Open|
|Led Chip Type||TS-AlInGaP|
|Max Qty of Samples||20|
|Minimum Luminous Intensity (mcd)||300.0|
|Number Of Colors||Single|
|Operating Temperature Range||-40°C to +100°C|
|Test Current (mA)||20.0|
|Typical Forward Voltage In V||2.0 V @ 20 mA|
|Typical Dominant Wavelength (nm)||590|
|Typical Luminous Intensity (mcd)||1000|
|Viewing Angle (degree)||15|