Optocouplers - Plastic

ASSR-1510-003E

High Current, Solid State Relay (Photo MOSFET), 60V/1.0A/0.5ohm

Description

The ASSR-15XX Solid State Relay series is specifically designed for high current applications, commonly found in industrial applications.

The ASSR-15XX Series consist of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.

The single channel configurations, ASSR-1510 and ASSR-1511, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration, ASSR-1520, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. Their electrical and switching characteristics are specified over the temperature range of -40°C to 85°C.

ASSR-1511 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io, increases to 2A and the on-resistance, R(ON) reduces to 0.25Ω.

Check Distributor Inventory

Lifecycle status: Active

Features

Compact Solid-State Bi-directional Signal Switch
Single and Dual Channel Normally-off Single-Pole-Single-Throw (SPST) Relay
60V Output Withstand Voltage
1.0A or 2.0A Current Rating (See Schematic for ASSR-1511 Connections A & B)
Low Input Current: CMOS Compatibility
Low On-Resistance: 0.175Ω Typical for DC-only, 0.35Ω Typical for AC/DC
Very High Output Off-state Impedance: 10 Teraohms Typical
High Speed Switching: 0.1ms (Ton), 0.02ms (Toff) Typical
High Transient Immunity: >1kV/µs
High Input-to-Output Insulation Voltage
(Safety and Regulatory Approvals Pending)
- 3750 Vrms for 1 min per UL1577
- CSA Component Acceptance

ASSR-1510 Options available are:
503E = Tape and Reel Packaging Option
XX3E = Lead-Free Option

ASSR-1511 Options available are:
301E = Gull Wing Option
501E = Tape and Reel Packaging Option
XX1E = Lead-Free Option

ASSR-1520 Options available are:
302E = Gull Wing Option
502E = Tape and Reel Packaging Option
XX2E = Lead-Free Option