Optocouplers - Plastic

ASSR-1411-001E

General Purpose, 1 Form A, Solid State Relay (Photo MOSFET), 60V/0.6A/1Ω

Description

The ASSR-14XX Solid State Relay (SSR) series consist of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.

The single channel configurations, ASSR-1410 and ASSR-1411, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration, ASSR-1420, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. Their electrical and switching characteristics are specified over the temperature range of -40°C to 85°C. They are used for general purpose switching of signals and low power AC/DC loads.

ASSR-1411 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io, increases to 1.2A and the on-resistance, R(ON) reduces 0.5Ω.

Check Distributor Inventory

Lifecycle status: Active

Features

Compact Solid-State Bi-directional Signal Switch
Single and Dual Channel Normally-off Single-Pole-Single-Throw (SPST) Relay
60V Output Withstand Voltage
0.6A or 1.2A Current Rating (See Schematic for ASSR-1411 Connections A & B)
Low Input Current: CMOS Compatibility
Low On-Resistance: 0.2Ω Typical for DC-only, 0.7Ω Typical for AC/DC
Very High Output Off-state Impedance: 10 Teraohms Typical
High Speed Switching: 0.1ms (Ton), 0.02ms (Toff) Typical
High Transient Immunity: >1kV/μs
High Input-to-Output Insulation Voltage
(Safety and Regulatory Approvals)
- 3750 Vrms for 1 min per UL1577
- CSA Component Acceptance
Options available are:
ASSR-1410
503E = Tape and Reel Packaging Option
XX3E = RoHS Compliant Option

ASSR-1411 and ASSR-1420
302E = Gull Wing Option
502E = Tape and Reel Packaging Option
XX2E = RoHS Compliant Option