Optocouplers - Plastic

Follow Avago Online

Share |

ACNW3190-000E

5.0 Amp High Output Current IGBT Gate Drive Optocoupler

Description

The ACNW3190 gate drive optocupler contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.

The high operating voltage range of the output stage provides the drive voltages required by gate controlled
devices. The voltage and high peak output current supplied by this optocoupler make it ideally suited for direct driving IGBTs with ratings up to 1200V/200 A, 600 V/300 A. For IGBTs with higher ratings, the ACNW3190 can be used to drive a discrete power stage which drives the IGBT gate. The ACNW3190 has the highest insulation
voltage of VIORM=1414 Vpeak in the IEC/ EN/DIN EN 60747-5-2.

Check Distributor Inventory

Lifecycle status:Active

Features

5.0 A Maximum Peak Output Current
15 kV/μs Minimum Common Mode Rejection (CMR) at VCM = 1500 V
0.5 V Maximum Low Level Output Voltage (VOL)
Eliminates Need for Negative Gate Drive
ICC = 5 mA Maximum Supply Current
Under Voltage Lock-Out Protection (UVLO) with Hysteresis
Wide Operating VCC Range: 15 to 30 Volts
500 ns Maximum Switching Speeds
Industrial Temperature Range: -40°C to 100°C
Safety Approval ( UL Recognized 5000 Vrms for 1 min, CSA Approval, IEC/EN/DIN EN 60747-5-2 Approved VIORM = 1414 Vpeak )

Applications