Products > Optocouplers - Plastic > Digital Optocoupler > 1 MBd Transistor Output Optocoupler > HCPL-053L
HCPL-053L
3.3V/5V Digital Optocoupler Family
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.
These optocouplers are available in an 8-pin DIP and in an industry standard SO-8 package. The following is a cross reference table listing the 8-pin DIP part number and the electrically equivalent SO-8 part number.
The SO-8 does not require ""through holes"" in a PCB. This package occupies approximately one-third the footprint area of the standard dual-in-line package. The lead profile is desigened to be compatible with standard surface mount processes.
These optocouplers can be used in LVTTL/LVCMOS or wide bandwidth analog applications.
The common mode transient immunity of 15000 V/ms minimum at VCM = 1500 V guaranteed for these optocouplers.
Lifecycle status:
Active
Features [+ - ]
3.3V/5V Dual Supply Voltages
Low power consumption
High speed: 1 Mb/s
LVTTL/LVCMOS compatible
Available in 8-pin DIP, SO-8
Open collector output
Guaranteed performance from temperature: 0 degrees C to 70 degrees C
Safety approval: UL, CSA, IEC/EN/DIN EN 60747-5-2
Options available are:
060 = IEC/EN/DIN EN 60747-5-2 VIORM
500 = Tape and Reel Package Option
XXXE = Lead Free Option
Applications [+ - ]
High voltage insulation
Video signal isolation
Power translator isolation in motor drives
Line receivers
Feedback element in switched mode power supplies
High speed logic ground isolation - LVTTL/LVCMOS
Replaces pulse transformers
Replaces slow phototransistor isolators
Analog signal ground isolation
Documents
[+ - ]
Data Sheets & Technical Specifications
Data Sheet - HCPL-250L, HCPL-050L, HCPL- 253L, HCPL-053L, LVTTL LVCMOS Compatible 3.3 V Optocouplers (1 Mb) Data Sheet (273 KB,PDF)
Options Data Sheet - Option 020 Optocoupler Option for 5000 V rms 1 Minute Requirement (85 KB,PDF)
Options Data Sheet - Option 060 IEC EN DIN EN 6074752 Option for Plastic Optocouplers (49 KB,PDF)
Options Data Sheet - Option 300, Gull Wing Surface Mount Option for Optocouplers (99 KB,PDF)
Options Data Sheet - Option 500 - Tape and Reel Packaging Option for Optocouplers (93 KB,PDF)
Options Data Sheet - Shipping Tube Dimension for Optocouplers (Plastic/Solid State Relay) (141 KB,PDF)
Selection Guide - Avago Technologies Optoisolation and Optical Sensor Products Selection Catalog (9775 KB,PDF)
Selection Guide - Optoisolation Products Filo Selection Guide (1182 KB,PDF)
White Paper - Assuring Data Integrity in an Optically Isolated 3.3 V I²C Bus (124 KB,PDF)
White Paper - Building a Safe and Robust Industrial System with Avago Technologies' Optocouplers (319 KB,PDF)
White Paper - Calculate the LED Lifetime Performance in Optocouplers to Predict Reliability (238 KB,PDF)
White Paper - Optocouplers in Industrial Communication (277 KB,PDF)
Application Notes Brochures/Promotional Materials Design & Reference Guides FAQ's Obsolescence Notices Product Change Notices
Product Changes Notice (PCN) - A03-003-32002150-0A, Dec. 2003 (12 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#82: Epitaxial Reactor Transfer for LEDs (37 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#88: Alternative black molding compound (95 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#90: Alternative manufacturing location inclusive of testing (35 KB,Word Document)
Product Changes Notice (PCN) - PCN: A03-001-32002150-0A, Sept. 2003 (303 KB,PDF)
Product Changes Notice (PCN) - PCN: A04-001-32002150-0A, Jan. 2004 (16 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-001-32002150-0A, Mar. 2005 (274 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-001-475179-0A, JUL. 2005 (374 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-003-32002150-0A, May 2005 (13 KB,PDF)
Product Changes Notice (PCN) - PCN: A06-001-32002150-0C, JAN.2006 (91 KB,PDF)
Product Changes Notice (PCN) - PCN: V06-002-32002150-0A, May 2006 (34 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-002-32002150-0A, Mar. 2007 (17 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-003-32002150-0A, Apr. 2007 (19 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-003-32002150-0B (19 KB,PDF)
Product Changes Notice (PCN) - PCN: V08-003-32002150-0A (18 KB,PDF)
Product Changes Notice (PCN) - PCN: V08-006-32002150-0B (56 KB,PDF)
Product Changes Notice (PCN) - V07-010-32002150-0E (403 KB,PDF)
Quality & Reliability
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.
These optocouplers are available in an 8-pin DIP and in an industry standard SO-8 package. The following is a cross reference table listing the 8-pin DIP part number and the electrically equivalent SO-8 part number.
The SO-8 does not require ""through holes"" in a PCB. This package occupies approximately one-third the footprint area of the standard dual-in-line package. The lead profile is desigened to be compatible with standard surface mount processes.
These optocouplers can be used in LVTTL/LVCMOS or wide bandwidth analog applications.
The common mode transient immunity of 15000 V/ms minimum at VCM = 1500 V guaranteed for these optocouplers.
Lifecycle status:
Active
Features [+ - ]
3.3V/5V Dual Supply Voltages
Low power consumption
High speed: 1 Mb/s
LVTTL/LVCMOS compatible
Available in 8-pin DIP, SO-8
Open collector output
Guaranteed performance from temperature: 0 degrees C to 70 degrees C
Safety approval: UL, CSA, IEC/EN/DIN EN 60747-5-2
Options available are:
060 = IEC/EN/DIN EN 60747-5-2 VIORM
500 = Tape and Reel Package Option
XXXE = Lead Free Option
Applications [+ - ]
High voltage insulation
Video signal isolation
Power translator isolation in motor drives
Line receivers
Feedback element in switched mode power supplies
High speed logic ground isolation - LVTTL/LVCMOS
Replaces pulse transformers
Replaces slow phototransistor isolators
Analog signal ground isolation
Documents
[+ - ]
Data Sheets & Technical Specifications
Data Sheet - HCPL-250L, HCPL-050L, HCPL- 253L, HCPL-053L, LVTTL LVCMOS Compatible 3.3 V Optocouplers (1 Mb) Data Sheet (273 KB,PDF)
Options Data Sheet - Option 020 Optocoupler Option for 5000 V rms 1 Minute Requirement (85 KB,PDF)
Options Data Sheet - Option 060 IEC EN DIN EN 6074752 Option for Plastic Optocouplers (49 KB,PDF)
Options Data Sheet - Option 300, Gull Wing Surface Mount Option for Optocouplers (99 KB,PDF)
Options Data Sheet - Option 500 - Tape and Reel Packaging Option for Optocouplers (93 KB,PDF)
Options Data Sheet - Shipping Tube Dimension for Optocouplers (Plastic/Solid State Relay) (141 KB,PDF)
Selection Guide - Avago Technologies Optoisolation and Optical Sensor Products Selection Catalog (9775 KB,PDF)
Selection Guide - Optoisolation Products Filo Selection Guide (1182 KB,PDF)
White Paper - Assuring Data Integrity in an Optically Isolated 3.3 V I²C Bus (124 KB,PDF)
White Paper - Building a Safe and Robust Industrial System with Avago Technologies' Optocouplers (319 KB,PDF)
White Paper - Calculate the LED Lifetime Performance in Optocouplers to Predict Reliability (238 KB,PDF)
White Paper - Optocouplers in Industrial Communication (277 KB,PDF)
Application Notes Brochures/Promotional Materials Design & Reference Guides FAQ's Obsolescence Notices Product Change Notices
Product Changes Notice (PCN) - A03-003-32002150-0A, Dec. 2003 (12 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#82: Epitaxial Reactor Transfer for LEDs (37 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#88: Alternative black molding compound (95 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#90: Alternative manufacturing location inclusive of testing (35 KB,Word Document)
Product Changes Notice (PCN) - PCN: A03-001-32002150-0A, Sept. 2003 (303 KB,PDF)
Product Changes Notice (PCN) - PCN: A04-001-32002150-0A, Jan. 2004 (16 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-001-32002150-0A, Mar. 2005 (274 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-001-475179-0A, JUL. 2005 (374 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-003-32002150-0A, May 2005 (13 KB,PDF)
Product Changes Notice (PCN) - PCN: A06-001-32002150-0C, JAN.2006 (91 KB,PDF)
Product Changes Notice (PCN) - PCN: V06-002-32002150-0A, May 2006 (34 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-002-32002150-0A, Mar. 2007 (17 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-003-32002150-0A, Apr. 2007 (19 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-003-32002150-0B (19 KB,PDF)
Product Changes Notice (PCN) - PCN: V08-003-32002150-0A (18 KB,PDF)
Product Changes Notice (PCN) - PCN: V08-006-32002150-0B (56 KB,PDF)
Product Changes Notice (PCN) - V07-010-32002150-0E (403 KB,PDF)
Quality & Reliability
3.3V/5V Dual Supply Voltages
Low power consumption
High speed: 1 Mb/s
LVTTL/LVCMOS compatible
Available in 8-pin DIP, SO-8
Open collector output
Guaranteed performance from temperature: 0 degrees C to 70 degrees C
Safety approval: UL, CSA, IEC/EN/DIN EN 60747-5-2
Options available are:
060 = IEC/EN/DIN EN 60747-5-2 VIORM
500 = Tape and Reel Package Option
XXXE = Lead Free Option
Data Sheets & Technical Specifications
Data Sheet - HCPL-250L, HCPL-050L, HCPL- 253L, HCPL-053L, LVTTL LVCMOS Compatible 3.3 V Optocouplers (1 Mb) Data Sheet (273 KB,PDF)
Options Data Sheet - Option 020 Optocoupler Option for 5000 V rms 1 Minute Requirement (85 KB,PDF)
Options Data Sheet - Option 060 IEC EN DIN EN 6074752 Option for Plastic Optocouplers (49 KB,PDF)
Options Data Sheet - Option 300, Gull Wing Surface Mount Option for Optocouplers (99 KB,PDF)
Options Data Sheet - Option 500 - Tape and Reel Packaging Option for Optocouplers (93 KB,PDF)
Options Data Sheet - Shipping Tube Dimension for Optocouplers (Plastic/Solid State Relay) (141 KB,PDF)
Selection Guide - Avago Technologies Optoisolation and Optical Sensor Products Selection Catalog (9775 KB,PDF)
Selection Guide - Optoisolation Products Filo Selection Guide (1182 KB,PDF)
White Paper - Assuring Data Integrity in an Optically Isolated 3.3 V I²C Bus (124 KB,PDF)
White Paper - Building a Safe and Robust Industrial System with Avago Technologies' Optocouplers (319 KB,PDF)
White Paper - Calculate the LED Lifetime Performance in Optocouplers to Predict Reliability (238 KB,PDF)
White Paper - Optocouplers in Industrial Communication (277 KB,PDF)
Application Notes Brochures/Promotional Materials Design & Reference Guides FAQ's Obsolescence Notices Product Change Notices
Product Changes Notice (PCN) - A03-003-32002150-0A, Dec. 2003 (12 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#82: Epitaxial Reactor Transfer for LEDs (37 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#88: Alternative black molding compound (95 KB,PDF)
Product Changes Notice (PCN) - CCNPOC#90: Alternative manufacturing location inclusive of testing (35 KB,Word Document)
Product Changes Notice (PCN) - PCN: A03-001-32002150-0A, Sept. 2003 (303 KB,PDF)
Product Changes Notice (PCN) - PCN: A04-001-32002150-0A, Jan. 2004 (16 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-001-32002150-0A, Mar. 2005 (274 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-001-475179-0A, JUL. 2005 (374 KB,PDF)
Product Changes Notice (PCN) - PCN: A05-003-32002150-0A, May 2005 (13 KB,PDF)
Product Changes Notice (PCN) - PCN: A06-001-32002150-0C, JAN.2006 (91 KB,PDF)
Product Changes Notice (PCN) - PCN: V06-002-32002150-0A, May 2006 (34 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-002-32002150-0A, Mar. 2007 (17 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-003-32002150-0A, Apr. 2007 (19 KB,PDF)
Product Changes Notice (PCN) - PCN: V07-003-32002150-0B (19 KB,PDF)
Product Changes Notice (PCN) - PCN: V08-003-32002150-0A (18 KB,PDF)
Product Changes Notice (PCN) - PCN: V08-006-32002150-0B (56 KB,PDF)
Product Changes Notice (PCN) - V07-010-32002150-0E (403 KB,PDF)
Quality & Reliability