Optocouplers - Plastic

ACPL-312T-000E

Automotive 2.5 Amp Output Current IGBT Gate Drive Optocoupler

Description

The ACPL-312T automotive optocoupler contains an AlGaAs LED that is is optically coupled to an integrated circuit with a power output stage.

This automotive optocoupler is ideally suited for driving power IGBTs and MOSFETs in automotive motor control inverter and DC-DC converter applications.

The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by these optocouplers make them ideally suited for directly driving IGBTs with ratings up to 1200 V/100 A. For IGBTs with higher ratings, the ACPL-312T series can be used to drive a discrete power stage which drives the IGBT gate.

Check Distributor Inventory

Lifecycle status: Active

Features

2.5 A maximum peak output current
2.0 A minimum peak output current
25 kV/μs minimum Common Mode Rejection (CMR) at V_CM = 1500 V
0.5 V maximum low level output voltage (V_OL)
Eliminates need for negative gate drive
I_CC = 5 mA maximum supply current
Under Voltage Lock-Out protection (UVLO) with hysteresis
Wide operating V_CC range: 15 to 30 Volts
500 ns maximum switching speeds
Automotive temperature range: -40°C to 125°C
Safety Approval (Pending): UL Recognized 3750 Vrms for 1 min.(5kV for option x20E available upon request).CSA IEC/EN/DIN EN 60747-5-2
Options Available are:
- 300 = Gull Wing Surface Mount Option
- 500 = Tape and Reel Packaging Option
- XXXE = Lead Free Option