Optocouplers - Plastic

Follow Avago Online

Share |

HCPL-3760

Isolated Voltage/Current Detectors

Description

The HCPL-0370/3700 and HCPL-3760 are voltage/current threshold detection optocouplers. The HCPL-3760 is a low-current version of the HCPL-0370/3700. To obtain lower current operation, the HCPL-3760 uses a high-efficiency AlGaAs LED which provides higher light output at lower drive currents. The devices utilize threshold sensing input buffer ICs which permit control of threshold levels over a wide range of input voltages with a single external resistor.

The input buffer incorporates several features: hysteresis for extra noise immunity and switching immunity, a diode bridge for easy use with ac input signals, and internal clamping diodes to protect the buffer and LED from a wide range of over-voltage and over-current transients. Because threshold sensing is done prior to driving the LED, variations in optical coupling from the LED to the detector will have no effect on the threshold levels.

Check Distributor Inventory

Lifecycle status:Active

Features

Standard HCPL-0370/3700) and low input current (HCPL-3760) versions
AC or DC input
Programmable Sense Voltage
Hysteresis
Logic Compatible Output
Thresholds Guaranteed over Temperature
Thresholds Independent of LED Optical Parameters
Recognized under UL 1577 and CSA approved for Dielectric Withstand Proof Test Voltage of 3750 Vac,1 minute.
Options available are:
060 = IEC/EN/DIN EN 60747-5-2 Option
300 = Gull Wing Surface Mount Option
500 = Tape and Reel Packaging Option (1 K min.)
XXXE = Lead Free Option