Fiber Optics
- Automotive Polymer Optical Fiber
- Base Station
- Ethernet
- Eval Kits & Accessories
- Fieldbus/SERCOS Interface
- General Purpose, Industrial Control Data Link (1300nm)
- General Purpose, Industrial Control Data Link (650nm)
- General Purpose, Industrial Control Data Link (820nm)
- High Galvanic Isolation Link
- Industrial Fiber Optics
- Metro/Sonet
- Parallel Optics
- Storage
Follow Avago Online
HFBR-1528Z
10 MBd High Performance Link Transmitter for Industrial Applications, Horizontal Package, 1x4, RoHS Compliant
Description
The HFBR-0508Z Series consists of a fiber-optic transmitter and receiver operating at a 650 nm wavelength (red). The HFBR-1528Z transmitter is an LED in a low cost plastic housing designed to efficiently couple power into 200 μm diameter HCS and 1 mm diameter POF. The HFBR-2528Z receiver incorporates a PIN detector and digital output IC compatible with CMOS and TTL logic families.
HFBR-0508Z links operate from DC to 10 MBd at distances up to 50 meters with 1 mm POF and up to 500 meters with 200 μm HCS®.
HFBR-0508Z links operate from DC to 10 MBd at distances up to 50 meters with 1 mm POF and up to 500 meters with 200 μm HCS®.
Features
- RoHS-compliant
- Data transmission at signal rates of dc to 10 MBd
- Up to 50 meters distances with 1 mm Plastic Optical Fiber (POF)
- Up to 500 meters distances with 200 μm Hard Clad Silica (HCS®)
- Wide dynamic range receiver allows operation from zero to maximum link distance with a single transmitter drive current
- Link distances specified for variations in temperature, power supply, and fiber attenuation
- DC coupled receiver with CMOS/TTL output for easy designs: No data encoding or digitizing circuitry required
- Pulse width distortion controlled to limit distortion from low duty cycle or burst mode data
- High noise immunity
- Compatible with Avago's versatile link family of connectors, for easy termination of fiber
- 3D model available on request
Documents
Data Sheets & Technical Specifications
- Data Sheet - HFBR-0508Z Series, HFBR-1528Z Transmitter, HFBR-2528Z Receiver, 10 Megabaud Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 µm HCS®(145 KB,PDF)
- White Paper - Fiber Optics in Solar Energy Applications(725 KB,PDF)
- White Paper - Industrial Fiber Optic Products for Wind Turbine and Wind Farm Applications(238 KB,PDF)
Application Notes
- Application Note - AN 5374; 74AC08, Alternative LED Transmitter Driver Chip for DC-10MBd(193 KB,PDF)
Product Change Notices
Quality & Reliability
