HFBR-57E5APZ
125MBd SFP Transceiver for Fast Ethernet and FDDI Application with DMI Feature, Bail de-latch, Ext Temp (-40 to 85C), RoHS Compliant
The HFBR-57E5APZ Small Form-Factor Pluggable LC transceiver gives the system designer a product to implement FDDI/Fast Ethernet network with DMI and SONET OC-3 (SDH STM-1) physical layers for ATM and other services.
As an enhancement to the conventional SFP interface defined in SFF-8074i, the HFBR-57E5APZ is compatible to SFF-8472 (digital diagnostic interface for optical transceivers). Using the 2-wire serial interface defined in the SFF-8472 MSA, the HFBR-57E5APZ provides real-time information on temperature, LED bias current, LED average output power and receiver average input power. The interface also adds the ability to monitor the Receiver Loss of Signal (RX_LOS).
This transceiver operates at a nominal wavelength of 1300 nm with a LC fiber connector interface. It is optimized to operate using both 50/125µm and 62.5/125µm multimode fiber.
As an enhancement to the conventional SFP interface defined in SFF-8074i, the HFBR-57E5APZ is compatible to SFF-8472 (digital diagnostic interface for optical transceivers). Using the 2-wire serial interface defined in the SFF-8472 MSA, the HFBR-57E5APZ provides real-time information on temperature, LED bias current, LED average output power and receiver average input power. The interface also adds the ability to monitor the Receiver Loss of Signal (RX_LOS).
This transceiver operates at a nominal wavelength of 1300 nm with a LC fiber connector interface. It is optimized to operate using both 50/125µm and 62.5/125µm multimode fiber.
- RoHS compliant
- Compatible with ATM Forum UNI SONET OC-3 multimode fiber physical layer specification
- Lead free
- Industry Standard Small Form Pluggable (SFP) package
- LC duplex connector optical interface
- Operates with 50/125 μm and 62.5/125 μm multimode fiber
- Compatible with 100Base-FX version of IEEE802.3u
- Single +3.3 V power supply
- +3.3 V TTL LOS output
- Receiver outputs are squelch enabled
- Manufactured in an ISO 9001 certified facility
- -40°C to 85°C temperature range
- Bail de-latch
- Hot plug capability
- Factory automation at Fast Ethernet speeds
- Fast Ethernet networking over multimode fiber
- OC-3 SFP transceivers are designed for ATM LAN and WAN applications such as:
- ATM switches and routers
- SONET/SDH switch infrastructure
- Multimode fiber ATM backbone links
- High Electromagnetic Interference (EMI) Immunity
- High Voltage Isolation
- High Data Security
- Good Signal Integrity over Long Distance Transmission
- Cost Effective Solution
- Digital Monitoring Interface (DMI) enables remote diagnostic and troubleshoot transceiver
- Low power consumption
Data Sheets & Technical Specifications
- Data Sheet - HFBR-57E5APZ, Multimode Small Form-Factor Pluggable Transceivers with LC connector and DMI for FDDI and Fast Ethernet (222 KB,PDF)
- White Paper - Industrial Fiber Optics in Train Transportation Systems (893 KB,PDF)
